Watches

Slide-in Slide – Out wedding Settings

Many companies make wedding provisions custom “their products wear mechanism and comfort and safety. Are they manufacturer names or marks in ring? If so, you may want to contact them for information. Probably metal tag, when the ring is wear fingers push it, automatic lock into the second ring. Another idea is to take it to your jeweler, maybe there will be magnified they can determine how mechanism of the works.

I’m very familiar with this old-fashioned design and “slide-in slide – out” small arrow can see things design keep the rings together.

This device is an arrow head to see in the slide over the metal bar, it from a ring side. Other rings have helped to receive arrows. Sometimes, you have to lean out other ring to get the metal point in, remain unchanged. This is not a permanent links, only when you wear the rings.

As time goes on, these slippery connectors and connectors area to wear the second ring. After years of relation, just refuse to work properly. A good clean by jewellers and ultrasonic and steam may relax the connector so it will work and cleaning the other end another ring. This may help. If outside the best way is to try to use it, wear as are “rings”

Repairs will be very difficult, if connectors badly worn on both sides. Ratio, is one way to rings the on-site welding together of the ring at the bottom of the band, for long-term join. This means both ring always worn together, we had no problems twisted a ring wear. You may or may not want to do this.

Of course, the jeweler can simply remove or low viscosity slide in place, it does not zhang, keep ring no association between the two. If the ring finger in a stay in your pleasant way, you don’t need a connector function in the first place. You can just wear as are “rings”, not care connector. Want to wear as two rings fingers, don’t worry, if the connection. This means that no job rings, is the simplest method to solve the use of connectors.

These devices are popular those years ago, during the wedding rarely occur almost each set! Obvious advantages, there are connector never really did not prove to be a reliable and feasible functional… Or is not really need when laps, correctly sized fingers. Connector is almost a “cultural relic” ring design from many years ago.

Try to get the ring cleaning, see the connector and integrating other ring (check whether both sides have a mouth is different from the other), if that’s the case, wear it for a period of time, check your ideas. Generally speaking, I will be more attention of the stone set conditions. Five rings should be checked to certain years of wear did not leave any into thin and not set.

This is the first. Secondly, play connectors, if it works, it should work more easily fall in opening up other ring, take things considerable together when worn. If no effect is good, just forget about it and treat it as yes curiosity, a touch of the passage of time, did not see the design in modern ring what reason.